Référence: NU-CDCASE2
Nucular Replacement parts.
Référence: NU-CTHR
Nucular Replacement parts. Wired for a Nucular screen, will require to be re-wired for any other controller brand.
Référence: NU-CTALAD
Nucular Replacement parts.
Référence: NU-CBLE
Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to...
Référence: 50170-56000-000
Talaria OEM Replacement part.
Référence: 50400-56000-000
Talaria OEM Replacement part.
Référence: 50030-54001-000
Talaria OEM Replacement part.
Référence: 50190-56001-000
Talaria OEM Replacement part.
Référence: 50020-56000-000
Talaria OEM Replacement part.
Référence: 50300-56000-000
This display will ONLY fit the MX3 / TL3000 bikes. Please do not order for any other models as it will not work.
Référence: 50180-5600B-000
Talaria OEM Replacement part. Only looking for the screws? We have them in the OEM shop ; 10429-56000-000
Référence: TA-E001
Plug and play turn signal kit with everything needed for install. Front turn signals double as bright Running Lights. License plate light: Rear turn Signal Light included. Headlight switch included, when headlight is on off position, brake light, and signals are still functional, although running lights will be turned off. Turn Signal light switch...
Référence: 50180-5601B-000
Talaria OEM Replacement part. Attention! Only work with green connector wire. Only looking for the screws? We have them in the OEM shop ; 10429-56000-000
Référence: NU-CSURKIT
Wire extensions with bolts and nuts. For connection P24F controller to stock motor of Sur-Ron Light Bee. Also suitable as extension cords when installing the ChiBattery 72V on the Talaria XXX.
Référence: NU-CCANPHD-40cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Référence: NU-CCANPHD-120cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Référence: NU-CCANPHD-200cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Référence: NU-CCCOVER
Plastic covers to protect wires coming in/out of the Nucular Controller. Sold as a set (upper and lower piece)
Référence: NU-TALCDKIT-TAL
Fork stem mount kit, with Gopro style extension for Talaria bikes
