Référence: 209-9009
Tire Tube STI TR-6 TECH 2 HD
Les tubes de moto STI sont solides, plus solides, plus solides. Avec une épaisseur de 2 mm, le modèle "Heavy Duty" est 50 % plus épais que la plupart des tubes standard actuellement sur le marché.
Référence: 209-9009
Les tubes de moto STI sont solides, plus solides, plus solides. Avec une épaisseur de 2 mm, le modèle "Heavy Duty" est 50 % plus épais que la plupart des tubes standard actuellement sur le marché.
Référence: 10741-56000-000
Talaria OEM Replacement part.
Référence: GS-008
Talaria Stings OEM design for the breather leaves an open hose mounted next to the rear shock. If you have ever ridden a Sur Ron or other E-moto's. This is the least ideal place for an open line. Mud, dirt, and water spray, from your tire, will likely be able to enter your, gear case and compromise longevity. The GritShift R&D team has designed a...
Référence: 11-0114
Ideal to prevent the tire from slipping on the rim when running low tire pressure.
Référence: NU-CBLE
Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to...
Référence: NU-CTALAD
Nucular Replacement parts.
Référence: 14005-54000-000
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Référence: 50300-56C00-000
This display will ONLY fit the MX5 / TL5500 or XXXPRO / TL2500PRO bikes. Please do not order for any other models as it will not work.
Référence: NU-CTHR
Nucular Replacement parts. Wired for a Nucular screen, will require to be re-wired for any other controller brand.
Référence: NU-CCANPHD-120cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Référence: NU-CCANPHD-40cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Référence: NU-CDCASE2
Nucular Replacement parts.
Référence: NU-CCANPHD-200cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.