Référence: 03134-00010-000
Swing Arm Axle Tool Talaria X3 Concept (xXx)
Swing arm Axle tool for the Talaria X3 Concept. This tool is required to remove the swing arm for a belt change.
Nucular Replacement parts.
Référence: 03134-00010-000
Swing arm Axle tool for the Talaria X3 Concept. This tool is required to remove the swing arm for a belt change.
Référence: SH-B016
Oversized 250mm upgrade floating disc for Talaria MX3 / MX4 / xXx, will require the proper caliper spacers separately. Significant Brake upgrade over stock rotors.
Référence: 31211-YQ2B-0000
Garde-boue avant pour Talaria Sting, Sur-Ron Light Bee et Segway X260. Ajustement direct avec la fourche DNM / KKE / Fastace. Note! Ce garde-boue est un ajustement direct pour les fourches DNM volcano, KKE, Fastace et Talaria MX uniquement ! Ne fonctionne pas avec RST. Garde-boue personnalisé, percé avec précision, comprend le matériel de montage requis.
Référence: SH-B021
Oversized upgrade floating disc for any bike, will require the proper caliper spacers separately. Significant Brake upgrade over stock rotors.
Référence: NU-CTHR
Nucular Replacement parts. Wired for a Nucular screen, will require to be re-wired for any other controller brand.
Référence: NU-CCCOVER
Plastic covers to protect wires coming in/out of the Nucular Controller. Sold as a set (upper and lower piece)
Référence: NU-CCANPHD-200cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Référence: NU-CCANPHD-120cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Référence: 50170-56000-000
Talaria OEM Replacement part.
Référence: NU-CTALAD
Nucular Replacement parts.
Référence: 14005-54000-000
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Référence: NU-CCANPHD-40cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Référence: 50400-56000-000
Talaria OEM Replacement part.